還有就是這個：

--------
Diagnostics
--------
FLEXlm diagnostics on Tue 5/6/2003 17:49

-----------------------------------------------------
License file: C:\WINNT\saber.lic
-----------------------------------------------------
"SABER_HARNESS" v2003.6, vendor: avantd
  uncounted nodelocked license locked to NOTHING (hostid=ANY) no expiration date


This is the correct node for this node-locked license, but
I don't know if the license-key is good or not
-----------------------------------------------------
"SABER_SCOPE_NETLIST" v2003.6, vendor: avantd
  uncounted nodelocked license locked to NOTHING (hostid=ANY) no expiration date

我的安裝步驟完全按照論壇里的。。有個安裝的貼來完成的阿。。55555！~

我懷疑是不是盜版盤里的saber.lic是不是有問題阿。那位大蝦能不能把你們的lic文件發給我試試啊。。。我的郵箱：0001cxg@126.com

555！~~~111！！~好像換了個lic文件還是不行啊。。有沒有高手知道這是怎么事阿。。。

原saber.lic文件如下:(把ComputerName改成你電腦的名字,這個知道吧?其他的不用改,另外這個saber.lic文件copy到windows的根目錄下試試)

SERVER ComputerName ANY 7182
DAEMON avantd avantd.exe
PACKAGE SABERDESIGNER avantd 2003.6 C0D1442E3664 COMPONENTS=" \
SABER_HARNESS SABER_SCOPE_NETLIST SABER_SKETCH_NETLIST \
SABER_HARNESS_NETLISTER TESTIFY_NETLISTER SABER_INTERFACE \
SABER_IF IQBUS_AUTHOR AIM_DECRYPT COMPONENT_LIBRARY \
VEHICLE_ELECTRIC_LIB AIM_ENCRYPT AIM_DEVELOPER AIM_DEBUG \
VIEWLOGIC_NET SABER_DEV_MMP SABER_BUNDLE MODEL_ENCRYPTION \
GRAPHICS_INTERFACE SABER_SIMULATOR OPT_TEMPLATE_LIB CUSTOM_LIB \
HSPICE_MODEL_LIBRARY MODEL_SYNTHESIS ST_LIBRARY IQBUS_LIB \
WF_API SABER_SKETCH SABER_SCOPE SABER_GUIDE TESTIFY \
EXPT_EDITOR EXPT_EDITOR_PLUS MOTOR_DCPM_TOOL TR_ANALYSIS LSA \
MONTE_CARLO MOS_TOOL CORENL_CHAR DIODE_TOOL THERM_TOOL \
FUSE_CHAR BATT_TOOL DRCYCLE_TOOL LOAD_TOOL \
SABER_SKETCH_NETLISTER SABERRT_FE LINK_MATLAB TLU_TOOL \
BASIC_ANALYSES SENSITIVITY LINK_XMATH STRESS BATCH_MEASURE \
SPECTRAL NOISE DISTORTION IQBUS_DESIGNER \
BUNDLE_MCAD_PROJECTION HARNESS_UNIGRAPHICS HARNESS_CATIA \
HARNESS_PROCABLE HARNESS_MCADREAD SABERRT LITE SABER_MODELSIM \
MAST_MODEL FEMA WF_API_HSPICE HSPICE WF_API_STARSIM \
FAILURE_MODE AUT_NUMBER_PACAKGES AUT_NUMBER_MAJOR_PACAKGES \
SABERRT_HIL SABERRT_SIMULATOR POWER_TOP TLV_TOOL MEASURE TNOM \
WL INCLUDE_ST_DUMP SIM_DELTAI SIM_DELTAV SIM_POSTAT SIM_TRACE \
TRACE SIM_POSTSKIP SIM_GROUP SIM_VCD SIM_RRMAX SIM_UNITCAP \
SIM_V_SUPPLY SIM_WARNING SIM_ANALOG ASPEC SCALE SCLAM \
SIM_DENSE_KNOT SIM_MODEL SIM_MOSTECH SPICE SIM_MODE \
SIM_LUMPCAPS SIM_FULLDIODE SIM_PLEVEL RETOL ABSTOL \
SIM_ACCURACY GMIN MUTLITHREAD POST PROBE DELTAI DELTAV \
SIM_MONITOR_TOL SIM_POSTTOP MCT_TOOL" ck=66
FEATURE SABERDESIGNER avantd 2003.6 permanent uncounted 379FE5198C7F \
HOSTID=ANY ISSUER=ISO ck=197

試過了。。。還是沒用阿。。也不知道怎么回事。。。好像那句話的意思：sever 不能初始化阿。。這是軟件原因嗎？

licence軟件裝了嗎.要么在別的地方重新下載一個saber吧.

該裝的都裝了。。。

還有奇怪的就是刪除程序里找不到saber...

你的問題解決了嗎？我也碰到這個問題了，不過很快就解決了，你要還有問題我再發上來我是怎么解決的

我也有類似問題，你是怎么解決的？謝謝！

我已經安裝好了,也能運行.可是用了一會后就出現了下面的提示:應用程序正常初始化(OXC0000142)失敗,請單擊"確定"終止應用程序.然后我的電腦將無法工作,運行什么都會提示說資源不足無法運行.請各位大師指點.我都急出一身漢了

我也有這樣的問題.請問您是怎么解決的.謝謝!!

我也有同樣的問題。